1 Inch Right Angle Pneumatic Pulse Valve Die-casting Aluminum Body
AC220V AC110V AC24V DC24V
DMF-Z-25 pulse jet valve is a kind of right angle valve,which inlet
and outlet at 90 °. It simplifies the connection between gas bag
and blowing tube of a dust collector. It can provide stronger
airflow and meet dust removing requirements.
1.Electromagnetic pulse valve consists of an electromagnetic pilot
head, diaphragm and a valve body, a diaphragm cavity after an area
larger than the front cavity area, pressure force, so that the film
is in the closed position.
2.Electronic instrument input signals, so that the electromagnetic
pilot head is movable column, opens the discharge hole, after the
diaphragm cavity pressure gas discharge quickly, before the
diaphragm cavity pressure gas lift the diaphragm, open channel,
pulse valve for injection.
3.Electric pulse signal disappears, electromagnetic pilot head
spring to move the column reset immediately closed unloading hole,
after the diaphragm cavity gas pressure and spring force so that
the diaphragm closes the passageway, valve stop blowing.
4.Diaphragm damping hole on the movable column, when the pilot head
lift gas pressure unloading, the damping the effects of airflow,
when unloading hole closed, so that the pressure of the gas to
rapidly filled with rear cavity, the diaphragm closes the
passageway, stop blowing.
|Port Size||G 1''|
|Number of Diaphragm||1|
|Diaphragm Material||NBR (Common), all Available|
|Temperature Range||-25℃ to +80℃ or customized|
|Voltage||AC220V, AC110V, AC24V, DC24V|
|Valve Body||ADC12 Aluminum Die-casting|
|Armature||430FR Stainless Steel|
|Diaphragm & Seals||NBRNBR, HNBR, FKM, EPDM, Silicone, All Available|
|Spring||321 Stainless Steel|
Details about Diaphragm of DMF-Z-25
More Details About DMF-Z-25 Solenoid Pulse Valve On YOUTUBE:
1.Our Service purposes is Focus on your demands, Offer you best
1). Located in a seaside city Ningbo, Well-developed
2). We work on designing and manufacturing solenoid coil, solenoid
operator and solenoid valve for more than 10 years.
3). We are dedicated to providing high quality products and service
to our customers.
4). We also provide customized services.
Contact us if some points you have doubt
Contact us if somewhere need to change
Contact us if not the one you are looking for
Contact us if you are doing designing
2.High quality products
Take DMF-Z-25 as an example.
1).Easy to install
A). Prepare the pipes suit valve specification
B). Ensure tank and pipes are free from dirt, rust or other
C). Ensure supply air is clean and dry.
D). Mount valve to inlet pipes and blowtube to valve, tighten
E). Make electrical connections to solenoid
F). Apply moderate pressure to system and check for installation
G). Fully pressurise system.
H). Test fire and listen for proper actuation and crisp pulse noise
2.Can withstand high pressure
High quality die casting Aluminum alloy valve body with good
resistance to moisture and corrosion,would hold a pressure up to
0.8Mpa. Diaphragm Life over One million blows or 3 years.
Dust collector applications, in particular for reverse pulse jet
filter cleaning and its variations, including bag filters,
cartridge filters and envelope filters, ceramic filters and
sintered metal fibre filters.
Welcome to your any question and inquiry!