1'' DMF-Y-25 SBFEC Type Full Immersion Diaphragm Pulse Valve
Manifold Flat Mounted DC24V
The SBFEC full immersion diaphragm valves are principally used for
the cleaning of dust collector filters with compressed air. These
valves have been designed to be assembled on filters and to be
mounted onto a square header tank. They are called "full immersion"
because they draw the compressed air directly from the tank. with
higher pneumatic yield. By request they can be supplied complete
with the blow tube- The valve is fixed to the tank with a special
counter flange and living screws. The 1 1/2'', 2", 2 1/2", 3'' and
4" are all double diaphragm valves; the 1" is single diaphragm
valve. The valves are constructed in anodized die-cast aluminum. to
protect them from environmental and corrosive agents.
The SBFEC type full immersion series is available in the following
- DMF-Y. with integrated solenoid pilot
- MF-Y. with remote solenoid pilot mounted in enclosure.
YouTube video of DMF-Y-25 SBFEC Type Manifold Flat Mount Pulse
Technical paramters of SBFEC Type Full Immersion Diaphragm Pulse
|Blowing area (㎡)||8-10||12-16||18-28||27-38||37-65||70-90|
|Port size||G1''||G1 1/2''||G2''||G2 1/2''||G3''||G4''|
|Working medium||Compressed air|
|Protection class||IP 65|
|Service life||Over 1000000 times|
|Voltages||DC24V, AC110V, AC220V|
Tips: All related accessories are also sold, like Pulse Controller, Diaphragm, Solenoid Coil and Armature Assembly.
Main dimension of DMF-Y-25 SBFEC Type Dust Collector Solenoid
Product Details of DMF-Y-25 SBFEC Replacement Reverse Pulse Jet
Working priciple of dust collector:
The dust collector drives the dust-containing gas into the dust
chamber inside the dust collector. After the air passes through the
filter bag, it becomes clean and is discharged by the dust
collecting fan, and the dust is prevented from being adsorbed on
the outer surface of the filter bag, and then pulsed. The pulse jet
valve control blows high-pressure gas into the interior of the dust
filter bag, shakes the dust, enters the collecting hopper, and
passes through the air-locking device (there are two types of
air-locking devices: a star-shaped unloading device and a flapping
valve. The specific use environment depends on the row.
Function of dust collector:
There are two main purposes for dust collectors: one is to remove
dust from the air, improve the environment, and reduce pollution.
Therefore, dust collection equipment for this purpose is sometimes
called dust removal equipment, such as dust collection equipment
used for exhaust emissions from factories. Another use is to
collect and collect powdery products through dust collection
equipment, such as the collection and extraction of finished cement
by cement systems.
Application of dust collector:
The dust collector is a widely used dust removal device. Generally,
there are bag type dust collectors, pulse dust collectors, electric
dust collectors, and the like. The dust collector can be used for
particle dust collection. The exhaust gas treatment volume is large
and the resistance is small. It is suitable for dust removal of
cement plant grinding, dryer, crusher and other process equipment,
and can also be used for dust removal in grain, metallurgical and
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!